Renkforce RF-4463046 USB kabel 3m USB 2.0, črn

The Renkforce RF-4463046 3m USB 2.0 cable with USB A connectors on both ends provides a practical wired connection for a range of devices. Designed for USB 2.0 data transfer, the cable supports transfer rates up to 0.48 Gbit/s and features gold-plated contacts to improve conductivity and corrosion resistance. The 3 meter length and black finish allow flexible placement of connected devices while maintaining a discreet appearance.

Advantages

The gold-plated contacts reduce oxidation and help maintain a stable electrical connection over time. The 3 m length increases reach compared with standard short cables, enabling connections between devices across a desk or to peripherals located farther from the host. The cable’s USB A to USB A configuration is compatible with devices and hubs that accept Type-A connections, and the black jacket helps hide wear and dirt during regular use.

Key specifications

• Interface: USB 2.0, USB A — USB A
• Maximum data transfer rate: 0.48 Gbit/s
• Length: 3 m
• Contact plating: gold-plated contacts
• Colour: black

How to use

Connect one end of the cable to the USB A port of the host device and the other end to the USB A port of the peripheral or hub. Ensure both connectors are fully inserted into the corresponding ports. The cable provides a plug-and-play connection for devices that support USB 2.0; no additional drivers are usually necessary. For optimal signal quality, avoid sharply bending the cable or placing heavy objects on it.

Recommendations

Use the cable with devices rated for USB 2.0 to ensure reliable data transfer at the specified speed. For power-hungry peripherals, check the host’s USB port power specifications; if a device requires more current than the port supplies, use a powered hub or the device’s dedicated power source. Store the cable coiled without tight knots to extend its service life.