Kaljeno steklo Ringke Easy Slide, 2 kosa, za Galaxy S26 FE, prozorno

• About this product

Ringke Easy Slide 2-pack tempered glass for Samsung Galaxy S26 FE is a set of two screen protectors with an installation frame. The wide Case Friendly cutout ensures full compatibility with most cases available on the market and all Ringke cases.

• 9H Hardness

The glass is made of reinforced material with 9H hardness. The screen is protected against scratches from keys, coins or other sharp objects. You can carry your phone together with keys and coins, because the glass effectively protects the screen.

• Easy Slide frame during installation

The Easy Slide installation frame is included in the set. Placing the frame with the glass already mounted onto the phone ensures precise alignment. This makes installation simpler and more accurate.

• Oleophobic coating

The coating reduces fingerprints and other dirt on the glass. The screen stays clean for longer, and everyday use of the phone becomes more pleasant.

• Thin and transparent glass

A thickness of 0.35 mm makes the protection almost invisible. It does not affect the slim profile of the phone. The crystal-clear surface does not change the colours displayed on the screen or the touch sensitivity.

• Protection against drops

The durable construction absorbs impact energy during unexpected falls. This protects the display from cracking. The glass therefore protects the screen both from scratches and from breaking when dropped.

• Specifications
• Type: Tempered glass
• Coating: Oleophobic
• Hardness: 9H
• Thickness: 0.35 mm
• Compatibility: Samsung Galaxy S26 FE
• Dimensions: 158.35 x 73.65 mm
• Installation guide

Start the installation in the bathroom right after a shower - the water vapour will absorb all the dust from the air so it won't bother you during installation.

Clean the screen surface thoroughly and degrease it, then polish it to a shine with a dry cloth. Make sure no dust particles remain.

Place the frame with the glass already mounted onto the phone - it will ensure precise alignment and make application easier.

Pull the starter film to begin the process of automatically applying the glass to the screen.

Press the glass firmly in the marked places. Do this carefully so the adhesive layer bonds well with the surface.

Remove the frame and push out any air bubbles by moving your finger in circular motions.