Riser kartica PCI 32 bit DeLOCK 41793

The DeLOCK Riser card PCI 32 Bit (model 41793, EAN 4043619417933) is an internal wired riser designed to enable horizontal installation of a PCI interface card when vertical mounting is not possible due to low case height. It provides a PCI host interface and a PCI output interface connected by a short 0.07 m flexible cable for space-saving expansion inside desktop PCs.

Advantages

The riser card allows installation of a 32-bit PCI card in tight enclosures by converting the card orientation from vertical to horizontal. Its short flexible cable preserves signal paths while minimizing occupied space. Designed for internal PC use, it maintains standard PCI connectivity and fits systems that require compact expansion solutions.

Suitable for

• Small form factor or low-height computer cases
• Installing a PCI expansion card horizontally
• Systems that need internal PCI connectivity without changing the motherboard

Key specifications

• Brand: DELOCK
• Model / MPN: 41793
• EAN: 4043619417933
• Interface (host): PCI
• Interface (output): PCI
• Bus width: 32 bit
• Internal use: Yes
• Cable length: 0.07 m

How to use

Power off the PC and open the case. Connect the riser card's PCI host connector to a free PCI slot on the motherboard, then attach the PCI expansion card to the riser card's PCI output connector so the card sits horizontally. Secure the expansion card or riser as needed according to your case layout, close the case and power on the system. Install any required drivers for the expansion card following the manufacturer's instructions.

Recommendations

Ensure the PC is powered off and disconnected from mains before installation. Verify clearance and secure mounting to prevent strain on the PCI connectors; avoid routing the cable near moving parts or heat sources. Use only for internal PC installations with compatible PCI cards and motherboards.