Servo ročica ROBITRONIC Alu 24Z siva dvojna ročica (2 nivoja)

This durable aluminium double servo arm features small side screws to optimize mounting on the servo main shaft, with 3mm holes spaced at 20mm and 24mm, and a 2mm left/right distance.

The grey aluminium 24Z double servo arm (2 levels) has small screws on the side for mounting on the servo main shaft.

• Specifications
• Distance Between Holes: 20 mm and 24 mm
• Left/Right Distance: 2 mm
• Hole Diameter: 3 mm

The servo arm has two different levels with a height difference of 2 mm, making it ideal for throttle and brake linkage on off-road vehicles with double brake linkage on the centre differential. It is suitable for servos with a 24-tooth output shaft, such as from Hitec, and has a total length of 56 mm as well as two M3 mounting holes at a distance of 20 mm and 24 mm from the centre.

The CNC-machined aluminium double servo arm is fastened to the servo with one mounting screw from above and two lateral hexagon socket screws. The lateral screws clamp the arm on the output shaft, so it stays in place even if one screw is lost. The 100% backlash-free connection allows more direct linkage and relieves the gearbox.

The two sides of the double servo arm are at different heights. This allows the throttle and brake linkage of off-road vehicles to be controlled: the height difference of the servo horn compensates for the difference caused by the double brake linkage on the centre differential.

Suitable for servos with 24-tooth gear ring / output shaft, e.g. from Hitec.

• Technical data
• Total length of servo arm: 56 mm
• Total height: 7 mm
• Press-in depth for servo gear: 3 mm
• Height difference between the two levels: 2 mm
• Mounting holes: M3 (2 pcs.)
• Hole spacing of mounting holes to centre: 20 mm (hole 1) / 24 mm (hole 2)
• In the box
• 1× Anodised double arm servo lever 24 teeth
• 2× Hexagon socket screws
• Brand: Robitronic