Šablona za podboje vrat wolfcraft 3675000

The wolfcraft 3675000 door frame jig is designed to support and align door frames during installation. It holds the frame steady while foam or sealant is applied and helps keep the sides parallel for an accurate fit. Suitable for door widths from 600 to 1000 mm, the jig is supplied on a paperboard card and is intended for both professional installers and DIY users who need reliable alignment during fitting.

Advantages

The jig supports the frame during foam filling and ensures the sides remain parallel, reducing the risk of misalignment. It attaches firmly to the door frame to support it during fitting and makes alignment easier. The device is compatible with all doors having widths between 600 and 1000 mm and is supplied on a paperboard card for convenient storage and handling.

Suitable for

• Installation of internal door frames with widths 600–1000 mm
• Holding frames steady while applying foam or sealant
• Professional carpenters and joiners
• DIY home renovation and door replacement projects

Key specifications

• Brand: Wolfcraft
• Model / MPN: 3675000
• EAN: 4006885367500
• Suitable door width: 600–1000 mm
• Packaging: paperboard card

How to use

Position the jig on the door frame at the required height and attach it so that it holds the frame securely and keeps the sides parallel. Use the jig to support the frame while you fill the gap with foam or sealant, then check alignment and make any fine adjustments before the foam sets. After the foam has cured and the frame is stable, remove the jig and complete any finishing work.

Recommendations

Use the jig on frames within the stated width range (600–1000 mm). Verify that the jig is firmly attached before applying foam. Allow foam or sealant to cure fully before removing the jig to maintain accurate alignment.