Sandberg USB 3.0 hub 6+1 vrat

The Sandberg USB 3.0 Hub (USB Hub Sandberg 6+1 ports) expands a computer’s USB connectivity by providing seven USB ports — six Type-A downstream ports plus one Micro-B upstream connection. The compact hub (148 x 58 x 38 mm) with a 0.7 m cable supports USB 3.2 Gen 1 (USB 3.0) data transfer rates up to 5000 Mbit/s, delivers a 5 V power output, and is compatible with Windows 10. Built-in overload protection helps safeguard both the computer’s USB ports and the hub’s ports from devices that draw excessive current.

Advantages

The hub offers seven ports in a small form factor, allowing multiple USB devices to be connected simultaneously while maintaining high transfer speeds provided by USB 3.2 Gen 1. Integrated overload protection increases safety for host ports and connected peripherals. The plug-and-play operation with automatic driver installation on Windows simplifies setup, and the included 0.7 m cable and compact dimensions make the hub suitable for use on desktop workspaces or in mobile setups.

Suitable for

• Connecting external hard drives and flash drives for fast data transfer
• Attaching keyboards, mice and other peripherals to a laptop or desktop
• Expanding USB ports for office workstations and home setups

Key specifications

• Brand: SANDBERG
• Model / MPN: 133-82
• Ports: 6 × USB Type-A (downstream) + 1 × Micro-B (upstream)
• Host interface: USB 3.2 Gen 1 (USB 3.0) Micro-B
• Hub interfaces: USB 3.2 Gen 1 (Type-A)
• Data transfer rate: up to 5000 Mbit/s
• Power output: 5 V (powered via USB or DC where applicable)
• Compatibility: Windows 10 (plug-and-play driver installation)
• Dimensions: 148 × 58 × 38 mm
• Weight: 0.152 kg
• Colour: Black

How to use

Connect the hub to your computer using the supplied USB Micro-B cable; Windows 10 will install required drivers automatically. After connection, plug your USB devices into the Type-A ports. If additional power is needed for multiple or power-hungry devices, connect a compatible DC power source if available for this hub model to ensure stable operation.

Recommendations

Use the hub on a stable surface and avoid plugging devices that exceed typical USB current limits. For best performance with high-speed storage devices, connect directly to a USB 3.0/3.1/3.2 port on the host and, when necessary, provide external power to the hub to prevent performance drops caused by insufficient power.