SATA kabel DeLOCK 82476 0,2m, rumen

The DeLOCK 0.2m SATA cable in yellow connects SATA devices such as SATA hard drives and SATA controllers. It follows the SATA II specification and features metal clips on the connectors for a secure snap-in connection. With a 0.2 m length, the cable is suited for compact internal PC setups and is easy to identify by its yellow color.

Advantages

The cable supports data transfer rates up to 3 Gbps according to the SATA II standard. Metal clips on both straight connectors provide additional retention to reduce accidental disconnection. Its short 0.2 m length helps manage clutter inside the case and the yellow color makes it simple to trace connections.

Suitable for

• Connecting SATA hard drives (HDD) to a motherboard or SATA controller
• Internal PC builds with limited cable space
• Systems where color-coded cabling simplifies identification

Key specifications

• Standard: SATA II
• Data transfer rate: up to 3 Gbps
• Connector type: straight / straight
• Cable length: 0.2 m
• Colour: Yellow

How to use

Align each straight SATA connector with the corresponding SATA port on the device and motherboard or controller, then press until the metal clip snaps into place. Ensure the connectors are fully seated to guarantee reliable data transfer. Route the cable to avoid sharp bends and keep it clear of cooling fans.

Recommendations

For stable performance, use this cable for internal connections where short length is sufficient; avoid excessive bending and do not expose the cable to sources of heat or liquids.