SATA kabel DeLOCK 83964 0,5 m, črn, rdeč

This SATA cable by DeLOCK (model 83964) is a 0.5 m internal cable with two SATA 7-pin connectors, designed for reliable data transfer between SATA devices such as hard drives, SSDs, controller cards and flash memories. The cable follows the latest SATA standard and supports data transfer rates up to 6 Gb/s while remaining backward compatible with earlier SATA versions. The cable comes in a black and red colour scheme and is intended for internal PC use. When connected to a hard drive the cable is routed to the left.

Advantages

The cable supports SATA III transfer rates up to 6 Gb/s and is backwards compatible with earlier SATA standards. Its metal clips on the connectors ensure secure, audible locking to prevent accidental disconnection. The 0.5 m length provides convenient reach for typical internal PC layouts, and the black-red colour scheme offers a clean visual match for modern builds.

Suitable for

• Connecting internal HDDs and SSDs
• Linking SATA controller cards to drives
• Replacing or adding internal SATA connections in desktop PCs

Key specifications

• Cable length: 0.5 m
• Connectors: SATA 7-pin to SATA 7-pin
• Data transfer rate: up to 6 Gb/s (SATA III)
• Compatibility: Backwards compatible with earlier SATA versions
• Product colour: Black, Red
• Manufacturer: DeLOCK, MPN 83964, EAN 4043619839643

How to use

Align the SATA 7-pin connectors with the drive and motherboard or controller card sockets and insert until the metal clip engages. Ensure the cable is routed without sharp bends and that it points left from the drive when applicable. Verify the connection in the system BIOS or operating system to confirm the device is detected and functioning.

Recommendations

For reliable operation, avoid excessive cable tension and sharp kinks; keep the cable clear of moving parts and high-temperature sources inside the case. Use the cable for internal connections only and match transfer rates according to the slowest connected SATA device.