Serijski kabel DeLOCK 86604, črn, 10 m, RS-232 Sub-D9

The DELOCK 86604 is a black serial cable with RS-232 Sub-D9 connectors and a length of 10 m. Designed for point-to-point data connections, this cable provides a straightforward wiring solution for devices that use the RS-232 standard. The durable jacket and fixed-pin Sub-D9 terminations support reliable signal transfer between computers, peripherals and industrial equipment over extended distances.

Advantages

This 10 m RS-232 Sub-D9 cable offers consistent electrical contact through molded connectors and standard pin configuration, reducing connection faults. The black outer sheath adds mechanical protection and flexible routing options, while the length allows connections between equipment in separate racks, workstations or rooms without additional adapters. The cable is compatible with widely used RS-232 interfaces, enabling simple integration with existing serial ports.

Suitable for

• Connecting computers to serial peripherals (modems, printers, barcode scanners)
• Linking industrial controllers and measurement devices with RS-232 ports
• Establishing serial console connections to networking equipment
• Temporary or permanent workstation setups requiring a 10 m reach

Key specifications

• Connector type: RS-232 Sub-D9 (male/female as applicable to device)
• Cable length: 10 m
• Color: Black
• Intended standard: RS-232 serial communication

How to use

Connect the Sub-D9 connectors to the corresponding RS-232 ports on your devices, ensuring correct orientation and secure seating of the molded ends. If required, tighten any connector screws to maintain mechanical stability. Route the cable to avoid sharp bends and sources of strong electromagnetic interference. For devices with reversed gender connectors, use the cable in the proper male-to-female configuration or an adapter if necessary.

Recommendations

Use this cable for short to medium-length serial connections where RS-232 is supported. Avoid running the cable parallel to high-voltage power lines to reduce interference, and periodically inspect the connectors and jacket for wear. For extended or mission-critical installations, verify signal integrity over the 10 m length in your specific environment before permanent deployment.