Serijski kabel Goobay 95435 prozoren 1,5 m USB tip-A

The Goobay 95435 Transparent 1.5 m USB Type-A cable is a USB-to-RS-232 serial adapter cable designed to connect devices with a legacy RS-232 interface to a computer USB Type-A port. The cable has a clear transparent jacket that exposes the internal wiring and a total length of 1.5 m, offering a practical reach for desktop and small office setups. The cable is RoHS certified, indicating compliance with environmental safety standards and reduced hazardous substances in its construction.

Advantages

The Goobay 95435 combines a straightforward plug-and-play design with a durable construction suitable for frequent connections and disconnections. Its transparent outer jacket provides visual confirmation of internal wiring and build quality. With a 1.5 m length the cable is long enough for typical workstation layouts while remaining compact for cable management. RoHS certification ensures attention to environmental and material safety requirements.

Suitable for

• Connecting industrial equipment, legacy peripherals and measurement instruments with RS-232 ports to modern computers
• Data transfer and configuration tasks for routers, modems and serial consoles
• Laboratory and workshop devices that require serial communication with a PC
• Home and office systems where a USB host must communicate with RS-232 devices

Key specifications

• Connector 1: USB Type-A (male)
• Connector 2: RS-232 (DB9 or serial connector as per RS-232 standard)
• Cable length: 1.5 m
• Product colour: Transparent
• Compliance: RoHS certified

How to use

To use the Goobay 95435, plug the USB Type-A end into an available USB port on your computer and connect the RS-232 end to the serial port of the device. If the host system requires drivers for USB-to-serial conversion, install the appropriate driver provided by the system or device vendor before establishing communication. Position the cable to avoid sharp bends and secure it to reduce strain on connectors. After connection, configure serial communication parameters (baud rate, parity, data bits, stop bits) in the terminal or application you are using.

Ieteicamais lietošanas veids

The cable is intended for data and configuration connections; avoid using it in environments with excessive moisture or mechanical stress, and disconnect before moving connected equipment.