SFP transceiver modul BlueOptics ONS-SE-100-FX=-BO 155 Mbit/s

The BlueOptics ONS-SE-100-FX=-BO is a fiber optic SFP transceiver module designed for 100BASE-FX applications with a maximum data transfer rate of 155 Mbit/s. Housed in a compact silver metal enclosure and weighing approximately 20 g, the module uses an SFP interface and an LC duplex optical connector for bidirectional optical links over multimode fiber. The module conforms to CE, RoHS and FCC standards and is intended for integration into networking hardware that supports MSA-compliant SFP optics.

Advantages

This SFP transceiver offers standardized SFP form factor compatibility and a 100BASE-FX optical interface for short-range fiber links. Built to meet MSA dimensions and electrical signalling, it enables straightforward hot-pluggable insertion into SFP ports. The compact silver module provides a lightweight option for network installations while maintaining regulatory compliance for electromagnetic and environmental requirements.

Suitable for

• Short-range multimode fiber Ethernet links (100BASE-FX)
• Switches, routers and storage systems with SFP ports that accept 100BASE-FX optics
• Network upgrades or replacements where an SFP form-factor fiber transceiver is required

Key specifications

• Interface type: SFP (Small Form-factor Pluggable)
• Maximum data transfer rate: 155 Mbit/s
• Optical connector: LC duplex
• Wavelength (typical for 100BASE-FX): 1310 nm
• Application: 100BASE-FX Ethernet over multimode fiber
• Weight: 0.02 kg
• Product colour: Silver
• Compliance: CE, RoHS, FCC

How to use

Install the BlueOptics SFP transceiver by inserting it into an available SFP port on compatible networking equipment until it clicks into place. Connect an LC duplex multimode fiber patch cable to the module’s optical connector, observing transmit/receive orientation. Ensure the host device supports 100BASE-FX optics and enable the corresponding interface in the device configuration. The module is hot-pluggable; however, follow your equipment vendor’s instructions for inserting or removing optics to avoid unintended link disruption.

Recommendations

For optimal performance, use high-quality multimode fiber and LC duplex patch cords, verify that the host hardware accepts third-party SFP modules, and confirm the required link distance is within the module’s supported range for 100BASE-FX. If digital diagnostic monitoring (DDM/DOM) is required, ensure the host equipment supports that feature to access real-time optical parameters.