SFP+ transceiverski modul BlueOptics 551104-BO 10000 Mbit/s

The BlueOptics 551104-BO 10000 Mbit/s SFP+ transceiver module is a compact fiber optic interface designed for high-speed network links. With a silver SFP+ form factor and support for data rates up to 10 Gbit/s, this module is intended for integration into switches, routers and other network devices that accept SFP+ pluggable transceivers. The device is certified to CE, FCC and RoHS standards and specifies a mean time between failures (MTBF) of 1,000,000 hours, providing predictable reliability for infrastructure deployments.

Advantages

The module’s SFP+ form factor allows hot-pluggable installation into standard SFP+ ports, helping to minimize downtime during upgrades or replacements. Its 10 Gbit/s capability supports bandwidth-intensive applications while the lightweight, silver enclosure simplifies handling and installation. Regulatory compliance with CE, FCC and RoHS ensures the transceiver meets common safety and environmental requirements for professional networking equipment.

Suitable for

• 10 Gigabit Ethernet uplinks and aggregation links
• High-speed fibre connections between switches and servers
• Data center interconnects and rack-to-rack links
• Network equipment requiring SFP+ pluggable transceivers

Key specifications

• Interface type: SFP+
• Maximum data transfer rate: 10000 Mbit/s (10 Gbit/s)
• Form factor: SFP+ pluggable transceiver
• Product colour: Silver
• Weight: 0.02 kg
• MTBF: 1,000,000 hours
• Compliance: CE, FCC, RoHS

How to use

Install the BlueOptics SFP+ transceiver into a compatible SFP+ port on a switch, router or network interface card while the host device is powered on or off as supported by the equipment (hot-pluggable). Ensure the transceiver is fully seated and the retaining latch engages. Connect the appropriate single-mode or multimode fiber patch cable to the transceiver’s optical interface, observing correct polarity and connector type. Confirm link status and speed via the host device’s management interface and verify that any required configuration (speed/duplex, port activation) is applied.

Recommendations

Use the transceiver with compatible networking hardware that supports SFP+ modules and 10 Gbit/s operation. Protect the optical connectors from dust by using protective caps when the transceiver is not connected. Follow manufacturer guidelines for operating temperature and handling; avoid excessive force when inserting or removing the module to prevent damage to the host port and the transceiver.