SFP-transceiverski modul BlueOptics AA1419074-E6-NT-BO 155 Mbit/s

The BlueOptics AA1419074-E6-NT-BO 155 Mbit/s SFP transceiver module is a compact fiber optic interface designed for point-to-point and short-range network links. This SFP-form-factor module supports a maximum data rate of 155 Mbit/s and is supplied in a silver housing. Built for integration into compatible network switches, routers and media converters, it provides a standard small-form pluggable interface with a rated mean time between failures of 1,000,000 hours and conformity to CE, FCC and RoHS requirements.

Advantages

The module's SFP form factor allows hot-pluggable installation in a wide range of networking equipment while minimizing space usage. A maximum transfer rate of 155 Mbit/s makes it suitable for legacy synchronous and asynchronous fiber links where this bandwidth matches existing infrastructure. High MTBF indicates long-term reliability and lower maintenance frequency. Compliance with CE, FCC and RoHS ensures the module meets common regulatory and environmental standards for electronic network components.

Suitable for

• Replacement or upgrade of existing SFP fiber ports operating at 155 Mbit/s
• Short-range fiber links in enterprise or industrial networks
• Integration into switches, routers or media converters with SFP slots
• Environments requiring compact, hot-swappable transceivers

Key specifications

• Interface type: SFP (small form-factor pluggable)
• Maximum data transfer rate: 155 Mbit/s
• Construction: compact SFP module in silver housing
• Mean time between failures (MTBF): 1,000,000 hours
• Standards compliance: CE, FCC, RoHS
• Weight: 0.02 kg

How to use

Insert the SFP transceiver into a compatible SFP slot on your network device with the connector oriented according to the device manufacturer's instructions. Ensure the device is powered according to its operational guidelines; many systems support hot-plugging, but follow your equipment's recommended procedures for inserting or removing transceivers. Connect the appropriate fiber optic cable to the transceiver's optical port, verify link status via the host device, and configure the network interface for the required 155 Mbit/s operation if manual settings are needed.

Recommendations

Store and operate the transceiver within the environmental limits specified by your host device. Use compatible single-mode or multimode fiber and connectors as required by the link design, and avoid exposing the optical interface to dust or moisture when not connected. For long-term reliability, periodically inspect connections and follow manufacturer guidance for ESD protection during handling and installation.