Račun Kontakt
Vaša košarica
DPD in FedEx – datum dostave na strani izdelka
Potrebujete pomoč? Vprašajte našo umetno inteligenco

Srednjenapetostni kabel InLine 95607 rdeč črn 1500V 7,5m

Srednjenapetostni kabel InLine 95607 rdeč črn 1500V 7,5m
Srednjenapetostni kabel InLine 95607 rdeč črn 1500V 7,5m
Srednjenapetostni kabel InLine 95607 rdeč črn 1500V 7,5m
Srednjenapetostni kabel InLine 95607 rdeč črn 1500V 7,5m
59,42 €
PDF
PDF

Dostava in vračila

Predvidena dostava torek, 1. december
O stanju vas bomo sproti obveščali prek našega podrobnega sistema za sledenje
Možnosti plačila
Bančna karticaVisaMastercardPayPalApple PayGoogle PayBančno nakazilo

Postavite vprašanje – AI-pomočnik odgovori takoj.

Opis

The InLine H1Z2Z2-K solar cable 6 mm² with preassembled solar plugs (pair: red and black) is developed for cabling photovoltaic systems and for medium-voltage DC applications up to 1500 V. The cable combines a tinned copper conductor, cross-linked polyolefin (XLPO) halogen-free insulation and a robust outer sheath to provide long-term, weather- and UV-resistant performance in PV installations. The product is supplied as a 7.5 m cable pair and is suitable where reliable DC power transmission and safe connectorized junctions are required.

Advantages

The cable supports a nominal AC voltage of 1.0/1.0 kV and a DC working voltage of 1.5 kV in accordance with EN 50618, providing a high safety margin for photovoltaic systems. Its tinned copper, fine‑stranded 6 mm² conductor and XLPO insulation deliver low DC resistance, flame retardancy (EN 60332-1-2) and low smoke, zero halogen behaviour. The construction is ozone-, weather- and UV-resistant and the cable has been voltage-tested and current-capacity tested to relevant standards.

Suitable for

  • Cabling photovoltaic (PV) modules and arrays
  • Connectorized DC runs between inverters, combiner boxes and modules
  • Medium-voltage DC installations up to 1500 V
  • Outdoor and rooftop PV applications requiring UV and weather resistance

Key specifications

  • Conductor cross-section: 6 mm², fine‑stranded
  • Conductor material: tinned copper
  • Nominal/working voltage: 1.0/1.0 kV AC; 1.5 kV DC (EN 50618)
  • Length: 7.5 m (pair: red and black)
  • Outer diameter: approx. 6.3 mm
  • Insulation wall thickness: nominal 0.7 mm; sheath nominal 0.8 mm
  • DC line resistance: 3.3 Ω/km
  • Voltage test on cable: AC 6.5 kV, DC 15 kV
  • Temperature range: -40 °C to +90 °C
  • Minimum bending radius: 26 mm
  • Standards: EN 50618, EN 60811, EN 60332-1-2 (LSOH)

How to use

Install the cable following local electrical regulations and the PV system designer’s instructions. Select the required conductor cross-section and confirm cable length for voltage drop and current capacity; consult a qualified solar technician if in doubt. Route and secure the cable to avoid excessive mechanical stress; respect the minimum bending radius of 26 mm. Connect the preassembled solar plugs at module and system ends according to the connector polarity (red = positive, black = negative) and perform insulation and continuity tests before energising the system.

Recommendations

Verify that the chosen 6 mm² cross-section meets the specific current and distance requirements of your installation. For long runs or high-current circuits, calculate voltage drop and, if necessary, select a larger cross-section. Only use matching, certified solar connectors and follow EN 50618 and local wiring codes when installing.
Ključne značilnosti
  • Cabling photovoltaic (PV) modules and arrays
  • Connectorized DC runs between inverters, combiner boxes and modules
  • Medium-voltage DC installations up to 1500 V
  • Outdoor and rooftop PV applications requiring UV and weather resistance
  • Conductor cross-section: 6 mm², fine‑stranded
  • Conductor material: tinned copper
  • Nominal/working voltage: 1.0/1.0 kV AC; 1.5 kV DC (EN 50618)
  • Length: 7.5 m (pair: red and black)
  • Outer diameter: approx. 6.3 mm
  • Insulation wall thickness: nominal 0.7 mm; sheath nominal 0.8 mm
  • DC line resistance: 3.3 Ω/km
  • Voltage test on cable: AC 6.5 kV, DC 15 kV
  • Temperature range: -40 °C to +90 °C
  • Minimum bending radius: 26 mm
  • Standards: EN 50618, EN 60811, EN 60332-1-2 (LSOH)

Specifikacije

Specifikacije
Barva izdelka
Rdeča, črna
Debelina izolacije
0.7 mm
Delovna napetost (najv.)
1500 V
Dolžina
7.5 m
Globina
7500 mm
Globina embalaže
220 mm
Material vodnika
Pocinjen baker
Ne vsebuje
Halogenska
Ognjevarno
Da
Potrdila o skladnosti
Oznaka TÜV, RoHS
Premer
6.3 mm
Presek vodnika
6 mm²
Prostornina paketa
2800 cm³
Širina
21 mm
Širina paketa
210 mm
Teža
600 g
Teža paketa
1.22 kg
Višina
21 mm
Višina paketa
60 mm
Vrsta izdelka
Srednjenapetostni kabel

Letak

Odpri Letak
Zgodovina cen v zadnjih 6 mesecih
Srednjenapetostni kabel InLine 95607 rdeč črn 1500V 7,5m
Trenutna
59,42 €
Najnižja 7 d.
59,42 €
Najvišja 7 d.
67,62 €
Sprememba 24 h
0,00 €   0%
Sprememba 7 d.
0,00 €   0%
Sprememba 30 d.
0,00 €   0%

Napiši mnenje

Ocena *
Opomba: HTML se ne prevede!

Več izdelkov INLINE v tej kategoriji

12
Prodajalec: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilna, Litva · Matična številka 303192950 · ID za DDV LT100008198612 · Pošiljamo iz EU (Litva)
WhatsApp
Messenger
Pozdravljeni, sem AI-pomočnik DistriNode. Lahko vam pomagam najti izdelke, primerjati možnosti, ustvariti PDF-ponudbe ali odpreti zahtevke za podporo.
Vse kategorije