Stolpni ventilator Midea MAC402R0BPK

The Midea MAC402R0BPK Cooling Tower Fan combines evaporative cooling features with ion purifying technology to deliver targeted airflow and fresher indoor air. Powered by a 45W motor, the unit offers an airflow of up to 300 m3/h, a 4‑litre water tank with two ice-box compartments for boosted cooling, and a compact vertical design sized 1000 x 310 x 310 mm in black finish. Controls are accessible via remote control or onboard buttons, and the fan retains settings after power interruptions thanks to a power‑off memory function.

Advantages

The fan integrates ion purifying to reduce airborne particles and odors while providing three wind modes (Normal, Sleep, Eco) and three speed levels to adapt cooling intensity and noise. A 7‑hour timer enables scheduled operation and the 60° auto swing distributes air across a room. Dual ice-boxes and the 4 L reservoir enhance evaporative cooling performance without complex installation, and remote control adds convenience.

Suitable for (tasks / use cases)

• Supplementary cooling in living rooms, bedrooms and home offices
• Cooling and light air purification in small retail or reception areas
• Temporary or portable cooling where air‑conditioning is not available
• Nighttime use with low‑noise Sleep or Eco modes

When it may not be suitable

This cooling tower fan is an evaporative type and works best in dry to moderately humid environments; performance will be reduced in very humid climates where evaporation is less effective. It is intended as a portable or supplementary cooling device rather than a replacement for central air‑conditioning in larger or tightly sealed commercial spaces.

Key specifications

• Motor power: 45 W
• Airflow: up to 300 m3/h
• Water tank capacity: 4 L with two ice‑box compartments
• Wind modes: Normal, Sleep, Eco
• Speed settings: 3 levels
• Timer: up to 7 hours
• Oscillation: 60° auto swing
• Control: remote control and onboard controls
• Memory: power‑off memory for last settings
• Dimensions (HxWxD): 1000 x 310 x 310 mm
• Color: black

How to use

Place the fan on a stable, level surface with clear space around the air inlet and outlet. Fill the 4 L water tank and add ice blocks into the designated ice‑box compartments if extra cooling is required. Connect to a suitable power outlet, switch on the unit and choose a wind mode and speed via the control panel or remote. Use the timer to limit run time as needed. Empty and dry the tank if the fan will be stored for long periods.

What to consider before purchase

• Intended room size and whether a portable evaporative cooler is adequate for that space
• Local climate humidity—evaporative cooling is less effective in high humidity
• Access to fresh water for the 4 L tank and space for occasional refilling
• Placement needs: requires open airflow and periodic cleaning of the tank and filters

Recommendations

For best results, use the fan in a well‑ventilated room and add ice to the ice‑boxes for temporary temperature boost. Run Eco or Sleep mode overnight to reduce noise and energy use, and perform routine cleaning of the water tank and any accessible filters to maintain airflow and hygienic operation.