Pametni fazni zatemnilnik Sunricher za DIN letev, ZigBee 3.0, 100-240 Vac Triac PUSH-DIM (SR-ZG9042A-D)

Main Features

• ZigBee AC phase cut dimmer based on latest ZigBee 3.0 protocol
• 100-240VAC Wide Input and Output Voltage
• Supports resistive loads, capacitive loads or inductive loads
• 1 Channel Output
• Input and Output with Screw Terminals, Safe and Reliable

Both leading edge version and trailing edge versions are available for choosing, preset by factory setting

Enables to control ON/OFF and light intensity of connected light source

• ZigBee end device that supports Touchlink commissioning

Can directly pair to a compatible ZigBee remote via Touchlink without coordinator

• Compatible with universal ZigBee gateway products
• Support power metering

Can operate under two-wire connection with no neutral lead or three-wire connection with neutral lead

• Advanced microprocessor control
• Implemented algorithm of smart light source detection
• Active power and energy metering functionality
• Soft start function

Innovative minimum dimming level and startup brightness setting function

Works with various types of switches – momentary, toggle, three-way, etc.

• Active element: semiconductor electronic switch

To be installed in wall switch boxes of dimensions allowing for installation, conforming to provisions of applicable regulations

• The Bypass is an extension unit

As a dimmer it operates under the following loads

• Conventional incandescent and HV halogen light sources

ELV halogen lamps and dimmable LED bulbs (with electronic transformers)

• MLV halogen lamps (with ferromagnetic transformers)
• Dimmable LED bulbs
• Dimmable compact fluorescent CFL tube lamps

Supported dimmable light sources (power factor > 0.5) with minimal power of 3VA using the Bypass (depending on the type of load)