Supermicro kabel SATA 0,6 m rdeč (2Ft.)

Supermicro SATA Cable 0.6 m Red (2Ft.) is a 0.6 m internal data cable designed for reliable point-to-point SATA connections inside desktop PCs, workstations and server chassis. The cable’s red jacket and standard straight SATA connectors provide a visible, serviceable link between motherboard or RAID controller ports and 2.5" or 3.5" SATA drives. Constructed from materials appropriate for internal computer use, the cable supports typical SATA signal and power routing requirements within constrained rack or case layouts.

Advantages

The cable’s 0.6 m length balances reach and neat cable management in racks and cases while minimizing excess slack that can obstruct airflow. The red colour improves drive bay and cable-trace identification during installation and maintenance. Built with standard SATA connector geometry, it ensures compatibility with most SATA ports and drive interfaces and provides consistent electrical characteristics for stable data transmission under normal operating conditions.

Suitable for

• Connecting motherboard or RAID controller SATA ports to internal 2.5" or 3.5" SATA drives
• Server and storage chassis with short cable routing requirements
• Desktop PC builds where visible cable identification is useful
• Upgrades and replacements of existing short SATA interconnects

Key specifications

• Cable length: 0.6 m
• Connector type: standard straight SATA connectors (male-to-male)
• Colour: red
• Intended use: internal PC/server data transmission
• Conductor and insulation: suitable for internal low-voltage signal routing

How to use

Power down the system and disconnect it from mains power before installing the SATA cable. Align each straight SATA connector with the SATA port on the motherboard, RAID controller, or drive, and insert firmly until the connector seats. Route the cable to avoid sharp bends and to maintain clearance for fans and other components. After connection, restore power and verify that the BIOS/UEFI and operating system detect the connected drive; confirm data link activity with disk management or drive utility tools.

Recommendations

For reliable operation, avoid excessive bending or pinching of the cable and keep it clear of hot airflow paths from CPU and GPU fans. Use the 0.6 m length where short, tidy routing is possible; for longer runs select an appropriately longer cable. Inspect connectors for damage before use and replace the cable if any physical defects are present.