USB 2.0 kabel ROLINE Tip A-B 3 m

The ROLINE USB 2.0 Cable Type A-B 3 m is a black data cable with a USB A male connector on one end and a USB B male connector on the other. Designed for USB 2.0 connections, it supports a maximum data transfer rate of 0.48 Gbit/s and a cable length of 3.0 m, making it suitable for linking peripherals such as printers, scanners and other USB B devices to host computers.

Advantages

This ROLINE cable provides a standard-compliant USB 2.0 connection between host devices and peripherals. Its 3 m length gives added reach for flexible device placement, and the black jacket offers a neutral appearance that fits most office and home setups. Connectors are pre-moulded for straightforward plug-and-play installation without additional drivers on typical operating systems.

Suitable for (tasks / use cases)

• Connecting printers to desktop or laptop computers
• Connecting scanners or multifunction devices
• Linking other USB B peripheral devices (external hubs, some audio interfaces) to a host
• Workstations or home offices requiring extended cable reach

Key specifications

• Connector 1: USB A (male)
• Connector 2: USB B (male)
• USB version: USB 2.0
• Maximum data transfer: 0.48 Gbit/s
• Cable length: 3.0 m
• Colour: Black
• Brand: ROLINE
• MPN: 11.02.8830
• EAN: 7611990138364

How to use

Plug the USB A connector into an available USB Type-A port on the host computer. Plug the USB B connector into the corresponding USB Type-B port on the peripheral device (for example, a printer or scanner). Ensure both devices are powered on as required. The cable supports standard USB 2.0 plug-and-play operation; most operating systems will recognise the connected device automatically. Route the cable to avoid sharp bends or pinch points to maintain signal integrity.

Recommendations

For best performance, use this cable with devices that support USB 2.0 or lower. Avoid running the cable alongside high-voltage power lines or sources of strong electromagnetic interference. If longer reach or higher transfer speeds are required, consider an appropriate USB extension, active cable, or a USB 3.x solution compatible with your devices.