USB 2.0 kabel tip A vtič / tip B vtič bež 0,5m InLine 34505H

The InLine USB 2.0 Cable Type A male / B male in beige is a 0.5 m data cable designed for USB 2.0 connections. It supports a maximum data transfer rate of 480 Mbit/s and is compatible with USB 2.0, USB 1.1 and USB 1.0 devices. The cable has a USB A male connector on one end and a USB B male connector on the other, suitable for connecting peripheral devices such as printers and scanners.

Advantages

This USB 2.0 cable offers reliable data transfer at High Speed (up to 480 Mbit/s) and broad backward compatibility with earlier USB standards. Its compact 0.5 m length reduces cable clutter near workstations, and the molded male Type A and Type B connectors provide secure plug-in connections for typical peripheral devices. The beige jacket provides a neutral appearance that integrates with office equipment.

Suitable for

• Connecting printers to computers
• Connecting scanners and multi-function devices
• Short-range USB peripheral connections on desktops or workstations
• Replacing lost or damaged USB A–B cords

Key specifications

• Connector 1: USB A (male)
• Connector 2: USB B (male)
• Cable length: 0.5 m
• Data transfer rate: up to 480 Mbit/s (USB 2.0 High Speed)
• Compatibility: USB 2.0 / USB 1.1 / USB 1.0
• Colour: Beige
• Brand: InLine, MPN: 34505H, EAN: 4043718027767

How to use

Connect the USB A male plug to an available USB Type-A port on your computer. Plug the USB B male connector into the corresponding USB Type-B port on your peripheral device, such as a printer or scanner. Ensure both devices are powered on; the operating system should detect the device automatically and install drivers if required.

Recommendations

Use the 0.5 m cable for short connections where devices are close to the computer; avoid excessive bending near the connector ends and route the cable to prevent strain. For longer distances or powered USB hubs, select a longer cable or active solutions compatible with USB 2.0.