USB kabel EFB Elektronik USB 3,0 A/A 3 m

The EFB Elektronik USB 3.0 A/A cable is a 3 m black data cable with USB A connectors on both ends. It supports USB 3.2 Gen 1 (also referred to as USB 3.1 Gen 1) for data transmission rates up to 5 Gbit/s. The cable features AWG30/AWG20 wire construction and combined shielding (foil plus 80% braided shielding) with moulded plugs to ensure stable connections and reduced electromagnetic interference.

Advantages

The cable provides high-speed data transfer up to 5 Gbit/s while maintaining signal integrity thanks to foil and 80% braided shielding. Molded plugs increase mechanical strength at the connector ends and the AWG30/AWG20 conductor design supports reliable transmission over the 3 m length. Its USB A to USB A configuration makes it compatible with devices that have standard USB A ports.

Suitable for

• Transferring large files between external drives and PCs
• Connecting USB A peripherals that require SuperSpeed data rates
• Home and office data connections where a 3 m run is needed

Key specifications

• Connectors: USB A to USB A
• USB version: USB 3.2 Gen 1 (USB 3.1 Gen 1)
• Maximum data rate: 5 Gbit/s
• Cable length: 3 m
• Wire construction: AWG30 / AWG20
• Shielding: Foil + 80% braided
• Product colour: Black

How to use

Plug one USB A connector into the host device (for example a PC or laptop) and the other USB A connector into the peripheral device (for example an external hard drive or docking station). Ensure both devices support the required USB mode for SuperSpeed transfers. Avoid sharp bends or kinks in the cable and do not apply excessive force when inserting or removing the connectors.

Recommendations

For optimal performance, use the cable in direct, short-run connections without adapters. Keep the cable away from strong sources of electromagnetic interference and inspect connectors periodically for damage to maintain reliable SuperSpeed data transfers.