Račun Kontakt
Vaša košarica
DPD in FedEx – datum dostave na strani izdelka
Potrebujete pomoč? Vprašajte našo umetno inteligenco

Sistem za upravljanje baterije VICTRON ENERGY VE.Bus BMS V2 (BMS300200200)

Sistem za upravljanje baterije VICTRON ENERGY VE.Bus BMS V2 (BMS300200200)
Sistem za upravljanje baterije VICTRON ENERGY VE.Bus BMS V2 (BMS300200200)
147,56 €
PDF
PDF
Zaloga 4 Šifra izdelka 4531803 Model BMS300200200 Garancija 2 leti

Dostava in vračila

Predvidena dostava ponedeljek, 30. november
O stanju vas bomo sproti obveščali prek našega podrobnega sistema za sledenje
Možnosti plačila
Bančna karticaVisaMastercardPayPalApple PayGoogle PayBančno nakazilo

Postavite vprašanje – AI-pomočnik odgovori takoj.

Opis

The VE.Bus BMS V2 is the next generation of VE.Bus battery management systems (BMS) from Victron Energy, designed to connect and protect up to 20 (12.8V or 25.6V) Lithium Battery Smart batteries (LiFePO4 or LFP).

  • Pre-alarm signal to warn of cell undervoltage.
  • Protection against overvoltage and undervoltage of each cell.
  • Protection against overtemperature and undertemperature.

The Victron Energy VE.Bus BMS V2 (MPN: BMS300200200) is the next generation of the VE.Bus BMS for Victron Lithium Smart batteries (LFP-Smart) 12.8V and 25.6V. Each individual cell of a LiFePO4 battery must be protected against overvoltage, undervoltage and overtemperature. This is exactly the task of the VE.Bus BMS V2. The product is suitable for protecting 12V, 24V and 48V battery banks and operates in an operating voltage range of 9 – 70 VDC.

  • VE.Bus BMS V2 in combination with Victron LiFePO4 batteries.

Victron LiFePO4 batteries have built-in cell balancing, temperature and voltage control (abbreviation: BTV). They are connected to the VE.Bus BMS V2 via two M8 circular connector cable sets. The BTVs of multiple batteries can be daisy-chained. They can be connected in series, parallel and both series and parallel, allowing a battery bank of 12V, 24V or 48V to be designed. Up to 20 batteries in a system are possible, resulting in an energy storage of max. 84kWh for a 12V system and 102kWh in a 24V and 48V system. For further details, please refer to the technical documentation for our LiFePO4 battery.

  • Core tasks of the Victron VE.Bus BMS V2.

Specifically designed for use with Victron Lithium Battery Smart 12.8V & 25.6V batteries.

Communicates directly with the lithium battery via the battery's M8 circular connector cables.

Disconnects VE.Bus inverter or inverter/chargers via VE.Bus and other loads via the "Load disconnect" terminal in case of cell undervoltage.

  • Difference from the VE.Bus BMS.

The VE.Bus BMS V2 was specifically designed for use in systems with GX devices and is therefore perfect for ESS or backup applications with a battery capacity of up to 84kWh (12V) or 102kWh (24V/48V).

In addition, the BMS V2 has a remote contact for remote control (ON/OFF).

  • Communication with VE.Bus products.

MultiPlus, Quattro or Phoenix inverters are connected to the "MultiPlus/Quattro" port with a standard RJ45 UTP cable.

The BMS disables inverting in case of cell undervoltage and charging in case of cell overvoltage or overtemperature.

  • Communication with remote control devices.

A GX device (e.g. Cerbo GX), a Digital Multi Control (DMC) panel or a VE.Bus Smart Dongle (including any combination) can be connected to the BMS via the "Remote panel" port. This accessory can be used in combination with the BMS to remotely control the switching state of the VE.Bus inverter or inverter/charger (On / Off / Charger only).

  • Terminals for additional inputs and outputs.

The BMS has a dedicated power output (GX-Power) for a GX device and an additional power input (Aux-In) for an external DC source, e.g. a mains adapter. In case of a system shutdown, the GX device is powered via the auxiliary voltage input or disconnected from the mains to prevent further discharge of the battery.

  • Technical data.
  • 1x User manual

Specifikacije

Specifikacije
Blagovna znamka
VICTRON ENERGY
Dodatna oprema v kompletu
Operating manual
EAN
8719076057277
Kategorija
Dodatki za sončne baterije
Koda zaščite (IP)
IP20
Model
BMS300200200
MPN
BMS300200200
Območje delovne temperature
-20°C - +50°C
Število izdelkov v kompletu
1
Število priključkov
2
Tip priključka
RJ45
Velikost
105.5 x 94.5 x 23.8 mm
Vlažnost zraka
max. 95% (non-condensing)
Vrsta izdelka
Battery Management System (BMS)
Zgodovina cen v zadnjih 6 mesecih
Sistem za upravljanje baterije VICTRON ENERGY VE.Bus BMS V2 (BMS300200200)
Trenutna
147,56 €
Najnižja 7 d.
147,56 €
Najvišja 7 d.
147,56 €
Sprememba 24 h
0,00 €   0%
Sprememba 7 d.
—   
Sprememba 30 d.
—   

Napiši mnenje

Ocena *
Opomba: HTML se ne prevede!

Več izdelkov VICTRON ENERGY v tej kategoriji

10

Priljubljeni izdelki v tej kategoriji

6
Prodajalec: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilna, Litva · Matična številka 303192950 · ID za DDV LT100008198612 · Pošiljamo iz EU (Litva)
WhatsApp
Messenger
Pozdravljeni, sem AI-pomočnik DistriNode. Lahko vam pomagam najti izdelke, primerjati možnosti, ustvariti PDF-ponudbe ali odpreti zahtevke za podporo.
Vse kategorije