Viličasti ključ Gedore 6576380

The Gedore 6576380 open end wrench conforms to DIN 894 and ISO 3318 with a jaw set at 15°. Manufactured from Gedore vanadium steel (31CrV3), this single-piece open end wrench weighs 249 g and is supplied one per pack. Finish varies by size: manganese-phosphate coating for sizes up to 38 mm, and steel-grey finishing for sizes 41 mm and larger. The tool includes a hanging hole and is available in sizes from 10 mm to 135 mm.

Advantages

Made from 31CrV3 vanadium steel, the Gedore 6576380 offers high strength and wear resistance. Conformance to DIN 894 and ISO 3318 ensures consistent geometry and fit, while the 15° jaw set improves accessibility in confined spaces. Size-specific finishes provide corrosion protection and a professional appearance. The hanging hole simplifies storage.

Suitable for

Key specifications

How to use

Select the wrench size that matches the nut or bolt head. Place the open end fully over the fastener so the jaws engage securely, then apply steady force in the required direction to tighten or loosen. Use the 15° jaw offset to reach fasteners in restricted spaces by flipping the wrench as needed. Store the wrench on a peg using the hanging hole when not in use.

Recommendations

Use the wrench only on correctly sized fasteners to avoid rounding. Inspect the tool regularly for wear or damage and replace if jaws are deformed. For high-torque applications, consider using appropriate torque tools to prevent overloading the wrench.