Vivolink PRODPOP30 kabel DisplayPort 30 m črn

Vivolink PRODPOP30 is a 30 m optical DisplayPort 1.4 cable designed for long-distance transmission of high-resolution video and audio. The ultra-flexible slim 4 mm design and optical construction support up to 8K@60Hz while keeping a small bending radius, making it suitable for installations where space and cable routing are limited.

Advantages

The optical DisplayPort 1.4 construction enables stable transmission of ultra-high-definition signals over 30 m without the signal degradation typical for long copper runs. Its slim, flexible jacket reduces strain on connectors and allows routing through tight spaces. The cable meets RoHS standards and provides two standard DisplayPort connectors for straightforward device compatibility.

Suitable for

• Long-distance connections between PCs and monitors or projectors
• Conference rooms and lecture halls requiring high-resolution video (up to 8K@60Hz)
• Installations with limited cable routing space or tight bends
• Professional AV setups where signal integrity over distance is required

Key specifications

• Length: 30 m
• Standard: DisplayPort 1.4 (optical)
• Maximum supported resolution: 8K@60Hz
• Connectors: DisplayPort to DisplayPort
• Outer diameter: approx. 4–5 mm (slim design)
• Colour: Black
• Weight: 0.53 kg
• RoHS compliant

How to use

Connect one DisplayPort connector to the source device (PC, media player) and the other to the sink device (monitor, projector). Ensure connectors are fully seated but avoid excessive force. Route the cable maintaining gentle bends; the slim optical design permits a small bending radius, but sharp kinks should be avoided. No external power is required for typical DisplayPort usage.

Recommendations

For best performance, check that both source and display support DisplayPort 1.4 and the desired 8K@60Hz mode. Avoid tight coils and protect connectors from mechanical stress during installation and transport.