Vivolink PRODVILD20 kabel DVI 20 m DVI-D črn

The Vivolink PRODVILD20 is a 20 m DVI-D cable engineered for high-quality digital video transmission. It supports a resolution up to 2560×1600 and uses DVI-D dual-link connectors on both ends for a reliable signal path. The cable features triple shielding and a 1.1 cm diameter for enhanced signal integrity and physical durability; it is RoHS-compliant and comes in black.

Advantages

High flexibility allows easier routing and installation over long runs. Dual-link DVI-D support enables higher resolutions and bandwidth compared with single-link cables. Triple shielding reduces electromagnetic interference for cleaner video output. The cable’s construction and 20 m length make it suitable for connecting displays and sources at a distance without active extenders.

Suitable for

• Connecting desktop PCs or workstations to DVI-D monitors or projectors
• Video setups in conference rooms or classrooms where a 20 m run is required
• AV installations that require a robust, shielded DVI-D connection

Key specifications

• Length: 20 m
• Connectors: DVI-D to DVI-D (dual link)
• Maximum supported resolution: 2560×1600
• Shielding: Triple shielding
• Diameter: 1.1 cm
• Colour: Black
• Compliance: RoHS
• Weight: 2 kg

How to use

Connect one DVI-D connector to the DVI output of the source device and the other connector to the DVI input of the display. Ensure both connectors are fully seated and, if present, tighten the connector screws to secure the connection. For best results, route the cable away from high-power electrical cables and sources of electromagnetic interference.

Recommendations

For optimal performance at higher resolutions, use the cable without excessive bending or tight coils and avoid running it alongside heavy electrical wiring. If signal issues occur over the full 20 m length, consider using an active DVI extender or a shorter cable where practical.