Vmesniška kartica DeLOCK 63911

This USB 2.0 to RS-232 adapter by DELOCK (Interface Card DeLOCK 63911) provides a serial connection for console control of network equipment. The adapter uses the FTDI FT232RL chipset, comes in blue, has a 1 m cable and is supplied in a polybag. It includes a 256 B FIFO buffer and supports a data transfer rate of 0.0002304 Gbit/s, making it suitable for connecting PCs or laptops to compatible routers, switches, access points and other devices with an RS-232 console port.

Advantages

The FTDI FT232RL chipset ensures wide driver support and stable serial communication. A 256 B FIFO buffer helps smooth data flow during transfers. The 1 m cable length offers convenient reach for desktop and rack-mounted setups, while the compact interface card design and polybag packaging simplify storage and transport.

Suitable for

• Console control of CISCO routers
• Configuration of network switches
• Access point management via serial console
• Connecting laptops or PCs to RS-232 devices for monitoring

Key specifications

• Manufacturer: DELOCK
• Model: 63911
• Interface: USB 2.0 to RS-232
• Chipset: FTDI FT232RL
• FIFO buffer: 256 B
• Data transfer rate: 0.0002304 Gbit/s
• Cable length: 1 m
• Colour: Blue
• Packaging: Polybag
• EAN: 4043619639113

How to use

Connect the USB end of the adapter to a PC or laptop and attach the RS-232 connector to the console port of the network device. Install the appropriate FTDI drivers on the host system if they are not already present. Use a terminal emulator (for example PuTTY, Tera Term or similar) configured with the device-specific serial settings (baud rate, data bits, parity, stop bits) to establish a console session.

Recommendations

Verify driver installation and terminal settings before attempting configuration. Use the 1 m cable to position the PC conveniently relative to rack-mounted equipment, and avoid excessive cable bending to prolong the adapter's service life.