LCD voltmeter Votronic 1256 S za regulatorje polnjenja SR in MPP

The Votronic LCD Voltmeter S is used to monitor the starter and auxiliary battery voltage.

• For 12 and 24 V electrical systems
• LC display
• LCD Voltmeter S: This digital measuring device displays either the voltage of the auxiliary or the starter battery. The voltages are shown as precise numerical values.

The additional bar display operates in the range of 10.5 to 15 volts and thus clearly shows the most interesting range of battery voltage from deep discharge to maximum charging voltage at a glance. During installation of the device, this function is set once for 12 V or 24 V operation. For 24 V operation, the range corresponds to 21.0 to 30.0 volts. Mixed operation, e.g., 24 V starter circuit and 12 V supply circuit, is also possible, as this setting is made separately for the starter and auxiliary battery.

Connection is made via screw terminals on the back of the device. Matching the VOTRONIC modular system, the LCD Voltmeter S aligns optically and mechanically (uniform height 85 mm) with the other display modules, and the low installation depth of only 22 mm allows mounting almost anywhere. The display is white backlit if required (switchable) and is very easy to read even from greater distances and in all lighting conditions.

• 1 pc. LCD Voltmeter S (display)
• 4 pcs. mounting screws
• 1 pc. operating instructions
• 1 pc. drilling template