Material za 3D tisk ABS Gembird 3DP-ABS1.75-01-G

Gembird 3DP-ABS1.75-01-G is a green ABS filament for 3D printing with a 1.75 mm diameter supplied on a 1 kg spool. Designed for use with printers from any brand, this ABS material offers high strength and good toughness while keeping part weight relatively low when printing larger volumes. The spool measures 215 mm x 215 mm for convenient storage and handling.

Advantages

The filament provides high strength and impact resistance typical of ABS, combined with good toughness that reduces the risk of brittle failure. Its lower density helps produce lighter models when printing larger parts. Compatibility with a wide range of 3D printers simplifies material selection and setup.

Suitable for

• Functional prototypes and mechanical parts
• Medium- to large-size models where weight matters
• General-purpose 3D printing with FDM/FFF printers

Key specifications

• Material: ABS
• Diameter: 1.75 mm
• Net weight: 1 kg
• Color: Green
• Brand: GEMBIRD
• MPN: 3DP-ABS1.75-01-G
• Package dimensions: 215 mm x 215 mm

How to use

Load the 1.75 mm filament into a compatible FDM/FFF 3D printer according to the printer manufacturer's instructions. Recommended printing settings for ABS typically include a nozzle temperature around 220–250 °C and a heated bed set to approximately 80–110 °C; adapt these values to your specific machine and model geometry. Use an enclosed build chamber or control ambient temperature to minimise warping and layer separation.

Recommendations

Store the filament in a dry environment, ideally sealed with desiccant, to prevent moisture absorption that can degrade print quality. Perform small test prints to fine-tune temperatures and print speeds before starting larger jobs.