Optični patch kabel Digitus OM3 ST/ST 1m

FO patch cord, duplex, ST to ST, multimode OM3 50/125 µm, 1 m. This fiber optic patch cord follows modern standards and high-end quality requirements for network cabling, providing duplex ST connector interfaces on both ends and multimode OM3 glass optimized for short- and medium-distance data transmission.

Advantages

The duplex ST–ST OM3 patch cord offers reliable signal transmission, low insertion loss and compatibility with equipment using ST connectors. Multimode OM3 fiber supports higher bandwidth for Ethernet and data center links while the 1 m length reduces excess cable in patch panels and racks.

Key specifications

• Type: Patch cord (duplex)
• Connectors: ST to ST
• Fiber type: Multimode (MM) OM3
• Core/cladding: 50/125 µm
• Length: 1 m

How to use

Uncoil the patch cord carefully to avoid bending below the minimum bend radius. Align and insert the ST connectors into corresponding ST ports until they click or seat firmly. Route the cable in the rack or patch panel to avoid sharp bends and secure with cable ties or management accessories as needed.

Recommendations

Inspect connectors for dust and clean with appropriate fiber cleaning tools before installation. Verify link performance after installation using suitable testing equipment and keep cable length appropriate for the planned link budget.