Patch kabel helos E2000 Multimode 1 m 50/125 steklena vlakna

helos E2000 patch cable, 1 m length, aquamarine color. This multimode fiber cable uses 50/125 µm OM3 fiber and is fitted with an E2000 connector on one end and an LC connector on the other. It is intended for short-range multimode links in data centers, telecom racks and network equipment, offering standardized core/cladding dimensions for reliable signal transmission and straightforward connector mating.

Advantages

The patch cable combines E2000 and LC multimode connectors to allow flexible interconnection between equipment with different port types. OM3 50/125 µm multimode fiber supports higher bandwidth for short-range applications compared with lower-grade multimode types, while the 1 m length simplifies rack-side patching and testing without excess cable slack. The aquamarine color provides clear visual identification in structured cabling environments.

Suitable for

• Short-range multimode fiber links in data centers
• Patching between telecom racks and network switches
• Interconnects for fiber transceivers and active network equipment
• Testing and lab setups requiring standardized OM3 fiber

Key specifications

• Type: Patch cable, OM3 multimode
• Length: 1 m
• Fiber: Multimode 50/125 µm (OM3)
• Connectors: 1× E2000 multimode to 1× LC multimode
• Color: Aquamarine
• Brand: helos, MPN: 254690, EAN: 4005938546909

How to use

Connect the E2000 connector to the corresponding E2000 port and the LC connector to the LC port of the target device. Ensure connectors are clean and dust-free before insertion to maintain signal quality. Route the cable within the rack or conduit to avoid sharp bends and mechanical stress; the 1 m length is intended for short patching runs.

Recommendations

Inspect and clean fiber connectors with appropriate cleaning tools before each connection, avoid exceeding the minimum bend radius, and store unused cables in protective covers to prevent contamination and mechanical damage.