Pisarniški trak 3M 9241233

Stationery Tape 3M 9241233 is an acrylic, pressure-sensitive transfer tape designed for use with Scotch® ATG adhesive applicators. Supplied on a densified kraft paper liner and reverse-wound for ATG systems, this transparent tape (12 mm × 33 m, 0.05 mm thickness) provides a high-adhesion, general-purpose bond suitable for many substrate and material combinations. It offers good solvent resistance and excellent UV resistance, and bonds on contact when applied through the ATG applicator.

Advantages

This 3M transfer tape delivers a controlled, uniform application of acrylic adhesive while the liner rewinds into the ATG applicator. It provides high initial adhesion, reliable hold, and resistance to solvents and ultraviolet light. The ATG tape system using this product is a cost-effective alternative to mechanical fasteners and liquid adhesives, and avoids the safety issues associated with hot-melt adhesives. The tape is easy to use, versatile, and suitable for repeated office and craft tasks.

Suitable for

Key specifications

How to use

Load the tape roll into a compatible Scotch® ATG adhesive applicator following the applicator manufacturer’s instructions. Apply the tape by running the ATG applicator along the substrate surface; the adhesive is delivered and bonds on contact while the liner rewinds into the applicator. For clean results, ensure surfaces are dry and free of dust, oil, or loose particles before application. Cut or trim the tape as required after application.

Recommendations

For best performance, use Stationery Tape 3M 9241233 with a matching Scotch® ATG applicator model designed for 12 mm width film. Store in a cool, dry place away from direct sunlight and apply at room temperature for optimal adhesion. Avoid using on oily, highly textured, or contaminated surfaces unless surface preparation is performed.