Polymaker Panchroma CoPE (CA14006) filament

Finding a filament that delivers both reliable printing performance and a striking, iridescent finish can be a challenge. The Polymaker Panchroma CoPE (CA14006) solves this by combining the ease of printing of a copolyester with a unique multi-color shimmer that shifts with light and viewing angle. This 1.75 mm filament on a 1 kg spool is ideal for decorative prints, artistic models, and functional prototypes where aesthetics matter as much as strength.

Who is it for

Makers, designers, and artists who want eye-catching prints without sacrificing printability. If you have a standard FDM printer with a heated bed (or even without, as low bed temperatures are supported), this filament opens up new creative possibilities.

Main features

• Material: CoPE (Copolyester) – combines toughness with flexibility, offering high elongation at break.
• Color: Panchroma – an iridescent, multi-color effect that changes appearance based on angle and lighting.
• Diameter: 1.75 mm ± 0.05 mm (typical tolerance for Polymaker filaments).
• Net weight: 1 kg (2.2 lbs) on a recycled cardboard spool.
• Printing temperature: 230-250 °C nozzle, 25-60 °C bed (or no heated bed with proper adhesion).
• Printing speed: 30-70 mm/s with cooling fan on for best results.
• Recommended build surfaces: glass with glue, PEI, or BuildTak.

Specifications

• Material: CoPE (Copolyester)
• Filament diameter: 1.75 mm
• Net weight: 1 kg
• Color: Panchroma (iridescent, multi-color)
• Nozzle temperature: 230-250 °C
• Heated bed temperature: 25-60 °C
• Printing speed: 30-70 mm/s
• Cooling fan: On
• Density: 1.23 g/cm³
• Tensile strength: 35 MPa
• Elongation at break: 150%
• Flexural modulus: 1500 MPa
• Heat deflection temperature (0.45 MPa): 60 °C
• Glass transition temperature: 70 °C
• Spool material: Recycled cardboard

Tips

For the best iridescent effect, print with thinner layer heights and consider using a larger nozzle to enhance the color shift. Ensure the filament is dry before printing; store in a sealed container with desiccant when not in use. A cooling fan is recommended to achieve sharp details and overhangs.