Polymaker Panchroma PLA Galaxy (CA02026) 1,75mm 1kg

PLA filament with a stunning galaxy multi-colour iridescent finish, delivering eye-catching prints with a smooth, glossy surface. Its reliable diameter tolerance of ±0.02 mm ensures consistent extrusion and layer adhesion on any FDM 3D printer.

Advantages

Panchroma PLA Galaxy prints effortlessly at moderate temperatures, offering low warping and excellent detail. The iridescent effect changes subtly with viewing angle, adding depth to decorative models, cosplay props, and art pieces.

Suitable for

• Decorative objects and display models
• Cosplay accessories and props
• Artistic sculptures and vases
• Educational projects and prototyping

Key specifications

• Material: PLA (Polylactic Acid)
• Colour: Galaxy (Multi-colour, Iridescent)
• Filament diameter: 1.75 mm
• Diameter tolerance: ±0.02 mm
• Net weight: 1 kg
• Recommended nozzle temperature: 190 – 220 °C
• Recommended bed temperature: 25 – 60 °C (or off)
• Recommended printing speed: 40 – 60 mm/s
• Cooling fan: On
• Density: 1.24 g/cm³
• Glass transition temperature: 60 °C
• Vicat softening temperature: 60 °C
• Melt flow index: 9.5 g/10min (190°C, 2.16kg)
• Tensile strength: 50 MPa
• Elongation at break: 6%
• Flexural modulus: 2630 MPa
• Impact strength (Izod): 2.5 kJ/m²
• Spool material: Plastic (Black)
• Packaging: Vacuum sealed with desiccant

Recommendations

Store in a dry, cool place and use a filament dryer if exposed to humidity. For best results, print a temperature tower to fine-tune settings for your printer.